[/font][font=Times New Roman]I need driver for Webcam. Read other ?'s n have tried many installs but no go. Always get" ERROR Call class Installer (remove)" message in box. Removed camera case and chipset reads" Z-STAR, ZS0211-LF, S50100A, 4040523." It is packaged as a GFM Model ULQ-902. I am running windows Vista64 but on an account that I use for net, I run I.E. 32bit. Please help me to find a driver that will get this to work. Thank you Lionfish7
Well, I'm not sure. If I'm running 64 on Admin Acct., but do my surfin on guest acct and all I changed was to run Explorer in 32mode, what should I install n where?
Dave, I'm goin to try installing the 64bit version on my admin acct hopin that it will run properly across any other accts. Thanks Will let u know how it turns out.
if the main windows o/s is 64 bit that is the version you should be loading.
so what is the file code on your 4-6 led there are several can you please pin point which one it is? Thank you.
knuckles if your having problems with a cam can you please let me know what cam it is and what windows you are running.
I have the same problem as Lionfish7 with the GFM webcam and getting the "Error Call Class Installer (remove)" message. I work on Window 7 and I believe it is the 64-bit. I tried using the links you posted above, but the ZS211 64bit driver download (is this the correct one?) wasn't working. Am I using the correct download you provide or must I use a different method?
I have the same error like LionFish7
the chipset of my usb wecam says:
v micro vc0305 48lq-lf ss0060c ?3050820 (?= i can't recognize it, it is half erased)
and I use Windows 7 x64 ultimate
help me please
Hello my name is Lucia
I'm new here, but i was reading a lot...i have this problme
with my webcam
i just reinstalled everything (windows etc) now i can't install my webcam
pctronix wc 5700L-188
it really worked in windows 7- starter
but now i have windows 7, home premium....
and i get the class call installer (remove) message every time i tried to install...i also shut off the antivirus and firewall, but nothing...
what can i do?
help me pleaseee
Thank you for answering :)
YES! It was in 32 bits now is--> 64 bits
is there a problem about it? :S
I read about the compatibility wizard, i think in spanish is: compatibilidad de programas.
i dont want to buy another camera. :(
nooo... I did everything what u recommended
compatibility wizard, select windows xp. block the firewall and my antivirus...etc etc...nothing..
I did everything you said. is there another possibilty?
I need the driver for webcam the only thing that is writen is ECOM 5 MP I tried to find it but nothing so far please help me if you can ...thank you
USB\VID_17A1&PID_0128\5&32975B0C&0&2 I hope that is the thing .I have win 7- 64b
ok i am deeply sorry for this answer so please don't hate me.
i have seen that device id string more then once on the forum in fact it pops up alot and mostly for windows 7
that cam is a older windows 32bit cam only.
the driver's i hold on site and indeed what i can find on the jap sites are only for windows 32bit.
its proved impossible to get running even with the compatibility wizard that microsoft like to boast about.
its a case of getting a new cam that can run on a 64bit system
on a side note your not alone with this problem
almost all the older cams do not run on windows 7 64bit and the reason for that is simple microsoft never pushed xp / vista 64bit and even they failed to support it fully themself's
the only one they are supporting and pushing is windows 7.
this leave's people such as yourself with older known working hardware without driver support as the small jap companies making these cams find it cheaper just to change the controller chip then to support their older models.